Basic Info.
Product Type
Extrusion Molding Machine
Feeding Mode
Multiple Feed
Assembly Structure
Separate Type Extruder
Engagement System
Full Intermeshing
Screw Channel Structure
Deep Screw
Computerized
Computerized
Product Description
Description of HDPE Water Supply and Gas Pipe Extrusion Line:
Introduction of HDPE Water Supply and Gas Pipe Machine
The FPEG series of gas / water supply pipe production line is the new pipe production line developed by Our Company after absorbing advanced technology from Europe, Use of energy-saving and efficient weight measurement of single-screw extruder, coordinate with the iNOEX gravity metering feeding system of Germany, realized extrusion speed and traction speed closed-loop control, high pipe yield, Effective control of the pipe wall thickness. Savings of 3% of the HDPE material.
Features of HDPE Pipe Extrusion Line:
1. High speed, high efficiency extrusion single screw extruder is specially designed for extruding PE etc. material, equipped with the lower noise, high speed and hard gear reducer. The Special grooved feeding bush with water cooling system results in increasing compression and filling factors. Specialised screw designs for high output, low melting temperature, good plasticization effection, lower energy consumption.
2. Spiral diffluence type extrusion die is specially designed for PE extrusion. Unique design of low-pressure inclined flow passage spiral/lattice basket diehead, ensures low temperature and high plasticizing extrusion of PE pipes; Special designed die core spiral temperature control, ensures the performance of PE pipes; Multi-layer co-extrusion die offers the advantages of low cost and flexibility of layer structure with different material. it features in easy adjustment and even extrusion, ensures that melting pressure and flux are uniformity, the surface of pipe is smooth and shapely.
3. Pipe marking line is extruded by smaller single screw extruder through the composited extrusion die.
4. Vacuum calibration water tank: it is equipped with two-stage vacuum system(for large diameter)advanced water recycle & high pressure cooling system, vacuum degree adjustment device and accurate water level & water temperature automatical control system. The accurate stannum bronze calibratation sleeve ensures fast cooling speed and molding of pipe. Its material is stainless steel.
5. Spray cooling water tank: Long cooling unit ensures high efficiency cooling, Unique pipeline design shorten cooling length, its material is stainless steel.
5. Haul-off unit: special integral transmission unit avoids asynchrony of individual transmission, Various control method ensures more flexible & accurate orientation, Accurate pressure regulating system makes hauling power adjustable. It has unique structure & flexible operation, its speed can be adjusted by motor inverter.
7. Cutting unit: Full-hydraulic design of cutting unit ensures flexible pressure in state of cutting pipes, Flexible adjust for saw position & cutting depth, Unique power input system ensures high reliability of planetary unit, With ultra silent & enforced sucking system, Unique non-scrap cutting unit enusre clean cutting section for 16mm to 315mm pipe.
8. Control system: Adopts the one of the most advanced plastic extrusion machinery control systems----PLC. It can ensure much higher quality extrusion, PLC system ensures high speed and convenient internet function that much more accurate and flexible control, intelligentized control order make the operation more simple.
Technical Parameters of HDPE Water and Gas Supply Pipe Extrusion Machine
Model | Range
(MM) | Extruder Model | Mark-line
Extruder Model | Extrusion Speed
(m/min) | Max.ouput | Total Installed | Overall Dimension |
PE-63 | 20-63 | SJ-50X33 | SJ-25X25 | 0.2-16 | 120 | 65 | 36X2.2X2.5 |
PE-110 | 20-110 | SJ-65X33 | SJ-25X25 | 0.2-20 | 220 | 115 | 56X2.2X2.5 |
PE-160 | 63-110 | SJ-75x33 | SJ-25X25 | 0.2-6 | 300 | 160 | 50X2.2X2.8 |
PE-250 | 75-250 | SJ-80X33 | SJ-25X25 | 0.2-5 | 400 | 200 | 52x2.2x3.0 |
PE-400 | 160-400 | SJ-90X33 | SJ-25X25 | 0.2-2 | 550 | 250 | 66X2.2X3.0 |
PE-500 | 200-500 | SJ-100X33 | SJ-25X25 | 0.1-1 | 700 | 300 | 70X2.3X3.5 |
PE-630 | 355-630 | SJ-120X33 | SJ-30X25 | 0.1-1 | 900 | 420 | 72X2.3X3.5 |
PE-800 | 400-800 | SJ-135x33 | SJ-30X25 | 0.08-0.8 | 1200 | 500 | 76X2.5X4.0 |
PE-1200 | 800-1200 | SJ-150X33 | SJ-30X25 | 0.05-0.5 | 1400 | 650 | 80X3.0X4.0 |
PE-1600 | 800-1600 | SJ-150X33 | SJ-30X25 | 0.05-0.5 | 1500 | 850 | 80X5.0X6.0 |
Technology and Service:
1. Seller supply full set of technical document, cutter and other full document (write in English) for the extrusion machine.
2. Seller supply training for buyer's staff until buyer can produce the eligible production independently.
3. Seller is responsible for installing, testing, adjusting and debugging the machines in buyer's factory.
4. Buyer should pay the expense for our engineers including for our engineer including round- way tickets, inland traffic, lodging and boarding fee when the machine is installed, tested and maintained.
5. Seller will go to install machines after the machine is arrived at buyer and buyer will have prepared all conditions (including power, water, compress air, tools and materials for producing pipe, etc) for installing and testing these machines. Buyer should pay 60USD/day.
6. When installing, people of both sides cooperate well and carefully, buyer supplies convenient working condition, any problem, should discuss peacefully and kindly.
7. Buyer supply proper working tools, equipments and other conditions.
8. The expense including the accommodation and materials of the trial-run the machine for testing and other expenses(electric, water, air and worker) will be on seller's account, if the buyer or their representatives do the inspection of the machines before shipment.
9. Guarantee period: 14 months after shipment (the date of B/L)
