Outdoor / Indoor Flooring Window Door PVC Extrusion Line with Different Mould

Outdoor / Indoor Flooring Window Door PVC Extrusion Line With Different Mould Introduction:

1. CE 
2. 3sets stock in shop 
3. different mould and size 
4. best 
 

Our device/plant/machine include this following sections:       
 

1. SJMS-65/132 double conical extruder                   

2. Vacuum sizing table                          

3. hauling off device  

4. cutting device        

5. stacker     

6. One set of moulds

The Features of our WPC profile machine              

   Combining advanced Canadian technology and the domestic practical situation, our company developed the SJMS series WPC production line.

   WPC profile extrusion line is adopted specially designed screw,barrel,mould and unique WPC craft and formula initiated by our company. The extruder can match with the auxiliary machines and moulds perfectly.

   The whole production line is of automatic control from the loading to the final discharging. The machines can also be manually adjusted separately. With the advantages of good plastication, low energy-consumption, high output, excellent performance, long endurance,ect.

   It can be equipped with relative auxiliary equipment, such as vacuum calibration platform, haul-off machine,cutting machine and material stacker.

   It is mainly used for extruding outdoor decorative WPC profiles, such as gardening landscapes, outdoor landscapes, pallets, ect.

1. materials: wood/rice husk/wheat straw,etc + plastic(can use recyled materials,PP,PE or PVC)

2. Application:

 decking profiles,like outdoor and indoor flooring, garden furniture,wall cladding,roof panel,pavillion ,fencing,rail,window frame , door frame,etc

3.processing craft:

1) PP / PE+WOOD EXTRUSION LINE CRAFT:

wood milling(wood powder,rice husk)---mixer(plastic+wood)---granulator---wpc extrusion line ---embossing/sandering/brush napping 

2) PVC+WOOD EXTRUSION LINE CRAFT:

wood milling(wood powder,rice husk)---mixer(plastic+wood)---wpc extrusion line ---embossing/sandering/brush napping 
 

Technology and service:

 1. Seller supply full set of technical document, cutter and other full document (write in English) for the extrusion machine.

  2. Seller supply training for buyer's staff until buyer can produce the eligible production independently.

  3. Seller is responsible for installing, testing, adjusting and debugging the machines in buyer's factory.

  4. Buyer should pay the expense for our engineers including for our engineer including round- way tickets, inland traffic, lodging and boarding fee when the machine is installed, tested and maintained.   

  5. Seller will go to install machines after the machine is arrived at buyer and buyer will have prepared all conditions (including power, water, compress air, tools and materials for producing pipe, etc) for installing and testing these machines. Buyer should pay 60USD/day.

  6. When installing, people of both sides cooperate well and carefully, buyer supplies convenient working condition, any problem, should discuss peacefully and kindly.

  7. Buyer supply proper working tools, equipments and other conditions.

  8. The expense including the accommodation and materials of the trial-run the machine for testing and other expenses(electric, water, air and worker) will be on seller's account,  if the buyer or their representatives do the inspection of the machines before shipment.

  9. Guarantee period: 14 months after shipment (the date of B/L)